The kodak Industrex porcessor, model M35-A is highly compact and requires only a 110-volt grounded power source--bringing the benefit of automatic processing to the smaller department or site operation.
The easy-to-use M35-A is also versatile, producing high-quality results from a wide range of film sizes and grades.
The unit is designed to save you money with its energy-conserving features, and it addresses environmental concerns by providing convenient options for proper disposal of exhausted chemical effluents. The Industrex M35-A gives you the quality and capabilities you need--right at your fingertips.
Compact 26.5" x 29.7" (67.3 cm x 75.4 cm) footprints means the M35-A is small enough for easy transport, and conserves table or counter space.
Automatic replenishment means convenience and efficiency. Replenidhment rates are easily preset to accommodate specific film and exposure requirement.
Automatic standby mode turns off drive, dryer blower and dryer heater when system is not in use. Full operation is restored at the touch of a button. Ideal for intermittent system use.
The M35-A offers multi-speed processing. It handles a wide range of film sizes, and processes both single- and double-emulsion film.
Easy To Install
Simplified plumbing requirements eliminate the need for hot-water lines and thermostatic mixing valves.
Features through-the-wall installation capability.
For excellent reliability, the M35-A utilizes the same highquality components of longer Kodak Industrex processors.
A thermistor logic circuit, water heat exchanger and developer recirculation system help ensure consistent developer temperature with a accuracy 0.5 F (0.3 C).
Warm-air drying means optimum film-surface quality.
Easy On The Budget
Saves energy costs by using ambient-temperature wash water--eliminates heating costs.
Automatic standby control saves energy and wear when system is not in use.
A 10-micron filter in the developer circuit removes particles to extend solution life. Life is further extended by 8-gallon (34-litre) replenishment tanks that feature floating lids to retard oxidation.
|
Film Size
|
No. of films
side by side |
2.5 min cycle
films/hour |
8.5 min cycle
films/hour |
10.5 min cycle
films/hour |
|
14 x 17 in. (35 x 43 cm)
|
1
|
100
|
30
|
23
|
|
7 x 17 in. (18 x 43 cm)
|
2
|
212
|
60
|
46
|
|
4.5 x 17 in. (11.4 x 43cm)
|
3
|
318
|
90
|
68
|
|
3.5 x 10 in. (8.9 x 25.4 cm)
|
4
|
540
|
180
|
140
|
|
Film size
|
2.5 min cycle
30 in./min |
8.5 min cycle
10 in./min |
10.5 min cycle
8 in./min |
|
3 ft (1 m lengths)
|
120 films/hour
|
60 films/hour
|
46 films/hour
|
|
9 ft ( 3 m lengths)
|
40 films/hour
|
20 films/hour
|
15 films/hour
|
- For archival washing of films, 77 F (25 C) water must be used.
- 2.5 min cycle can be used with Industrex B, P, G and S films only